This is the Sensirion SHT4X library for Arduino using the modules I2C interface.
Click here to learn more about the SHT4X sensor and Evaluation Kit.
To install, download the latest release as .zip file and add it to your Arduino IDE via
Sketch => Include Library => Add .ZIP Library...
Don't forget to install the dependencies listed below the same way via Add .ZIP Library
Note: Installation via the Arduino Library Manager is coming soon.
Connect the SHT4X Sensor to your Arduino board's standard I2C bus. Check the pinout of your Arduino board to find the correct pins. The pinout of the SHT4X Sensor board can be found in the data sheet.
Open the exampleUsage
sample project within the Arduino IDE
File => Examples => Sensirion I2C SHT4X => exampleUsage
Click the Upload
button in the Arduino IDE or
Sketch => Upload
When the upload process has finished, open the Serial Monitor
or Serial Plotter
via the Tools
menu to observe the measurement values. Note that
the Baud Rate
in the corresponding window has to be set to 115200 baud
.
Contributions are welcome!
We develop and test this driver using our company internal tools (version control, continuous integration, code review etc.) and automatically synchronize the master branch with GitHub. But this doesn't mean that we don't respond to issues or don't accept pull requests on GitHub. In fact, you're very welcome to open issues or create pull requests :)
This Sensirion library uses
clang-format
to standardize the
formatting of all our .cpp
and .h
files. Make sure your contributions are
formatted accordingly:
The -i
flag will apply the format changes to the files listed.
clang-format -i src/*.cpp src/*.h
Note that differences from this formatting will result in a failed build until they are fixed.
See LICENSE.
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。