[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.103-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1530 SMP T
ue Mar 8 13:05:01 GMT 2022
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[    0.000000] random: fast init done
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x0000000030000000-0x00000000fbffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1011008
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bc
m2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:27:E4:4E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=9a39dcf7-03 roo
tfstype=ext4 elevator=deadline rootwait
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
[    0.000000] Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000024890000-0x0000000028890000] (64MB)
[    0.000000] Memory: 3863792K/4050944K available (10240K kernel code, 1366K rwdata, 3196K rodata, 2048K init, 882K bss, 121616K reserved, 65536K cma-reserved, 3264512K hig
hmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 34363 entries in 101 pages
[    0.000000] ftrace: allocated 101 pages with 4 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1
[    0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000036] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000099] bcm2835: system timer (irq = 25)
[    0.000760] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000782] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000805] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000823] Switching to timer-based delay loop, resolution 18ns
[    0.001094] Console: colour dummy device 80x30
[    0.001848] printk: console [tty1] enabled
[    0.001918] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.001973] pid_max: default: 32768 minimum: 301
[    0.002155] LSM: Security Framework initializing
[    0.002354] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002401] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.003882] cgroup: Disabling memory control group subsystem
[    0.004133] CPU: Testing write buffer coherency: ok
[    0.004604] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.005828] Setting up static identity map for 0x200000 - 0x20003c
[    0.006043] rcu: Hierarchical SRCU implementation.
[    0.006983] smp: Bringing up secondary CPUs ...
[    0.008199] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.009563] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.010948] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.011109] smp: Brought up 1 node, 4 CPUs
[    0.011156] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.011186] CPU: All CPU(s) started in HYP mode.
[    0.011213] CPU: Virtualization extensions available.
[    0.012080] devtmpfs: initialized
[    0.026663] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.026910] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.026963] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028879] pinctrl core: initialized pinctrl subsystem
[    0.030005] NET: Registered protocol family 16
[    0.033922] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.034721] audit: initializing netlink subsys (disabled)
[    0.034993] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[    0.035551] thermal_sys: Registered thermal governor 'step_wise'
[    0.036262] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.036316] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.036726] Serial: AMBA PL011 UART driver
[    0.067667] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.080880] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-01-20T13:56:48, variant start
[    0.090892] raspberrypi-firmware soc:firmware: Firmware hash is bd88f66f8952d34e4e0613a85c7a6d3da49e13e2
[    0.131507] Kprobes globally optimized
[    0.136933] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.141792] vgaarb: loaded
[    0.142267] SCSI subsystem initialized
[    0.142508] usbcore: registered new interface driver usbfs
[    0.142585] usbcore: registered new interface driver hub
[    0.142673] usbcore: registered new device driver usb
[    0.143027] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.144930] clocksource: Switched to clocksource arch_sys_counter
[    1.089859] VFS: Disk quotas dquot_6.6.0
[    1.089977] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.090156] FS-Cache: Loaded
[    1.090373] CacheFiles: Loaded
[    1.100674] NET: Registered protocol family 2
[    1.100934] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.102503] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.102572] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.102653] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.102736] TCP: Hash tables configured (established 8192 bind 8192)
[    1.102912] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.102968] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.103217] NET: Registered protocol family 1
[    1.103923] RPC: Registered named UNIX socket transport module.
[    1.103956] RPC: Registered udp transport module.
[    1.103985] RPC: Registered tcp transport module.
[    1.104013] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.104053] PCI: CLS 0 bytes, default 64
[    1.107688] Initialise system trusted keyrings
[    1.107944] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    1.116276] zbud: loaded
[    1.118129] FS-Cache: Netfs 'nfs' registered for caching
[    1.118899] NFS: Registering the id_resolver key type
[    1.118949] Key type id_resolver registered
[    1.118978] Key type id_legacy registered
[    1.119130] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.119164] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.120209] Key type asymmetric registered
[    1.120241] Asymmetric key parser 'x509' registered
[    1.120449] bounce: pool size: 64 pages
[    1.120506] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.120732] io scheduler mq-deadline registered
[    1.120764] io scheduler kyber registered
[    1.125364] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.125420] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.125522] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.125633] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.187040] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.187426] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.187463] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.187499] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.187611] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.187870] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.191414] PCI: bus0: Fast back to back transfers disabled
[    1.191782] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.191926] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.192380] pci 0000:01:00.0: PME# supported from D0 D3cold
[    1.195920] PCI: bus1: Fast back to back transfers disabled
[    1.196035] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.196077] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.196180] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.196219] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.196654] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.196889] pcieport 0000:00:00.0: PME: Signaling with IRQ 61
[    1.197876] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
[    1.197928] bcm2708_fb: probe of soc:fb failed with error -2
[    1.203886] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.206956] iproc-rng200 fe104000.rng: hwrng registered
[    1.207283] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.208651] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.220883] brd: module loaded
[    1.233199] loop: module loaded
[    1.235038] Loading iSCSI transport class v2.0-870.
[    1.239895] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.335120] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.336336] usbcore: registered new interface driver r8152
[    1.336421] usbcore: registered new interface driver lan78xx
[    1.336501] usbcore: registered new interface driver smsc95xx
[    1.338130] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
[    1.338311] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.338376] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.341750] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000e0000000890
[    1.343112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.343154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.343191] usb usb1: Product: xHCI Host Controller
[    1.343221] usb usb1: Manufacturer: Linux 5.10.103-v7l+ xhci-hcd
[    1.343252] usb usb1: SerialNumber: 0000:01:00.0
[    1.344003] hub 1-0:1.0: USB hub found
[    1.344120] hub 1-0:1.0: 1 port detected
[    1.344822] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.344865] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.344969] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.345521] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.345561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.345597] usb usb2: Product: xHCI Host Controller
[    1.345626] usb usb2: Manufacturer: Linux 5.10.103-v7l+ xhci-hcd
[    1.345657] usb usb2: SerialNumber: 0000:01:00.0
[    1.346377] hub 2-0:1.0: USB hub found
[    1.346480] hub 2-0:1.0: 4 ports detected
[    1.348190] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.349034] usbcore: registered new interface driver uas
[    1.349159] usbcore: registered new interface driver usb-storage
[    1.349370] mousedev: PS/2 mouse device common for all mice
[    1.351010] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.354366] sdhci: Secure Digital Host Controller Interface driver
[    1.354401] sdhci: Copyright(c) Pierre Ossman
[    1.355207] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.355830] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.360245] ledtrig-cpu: registered to indicate activity on CPUs
[    1.360611] hid: raw HID events driver (C) Jiri Kosina
[    1.360817] usbcore: registered new interface driver usbhid
[    1.360847] usbhid: USB HID core driver
[    1.366450] Initializing XFRM netlink socket
[    1.366514] NET: Registered protocol family 17
[    1.366657] Key type dns_resolver registered
[    1.367039] Registering SWP/SWPB emulation handler
[    1.367238] registered taskstats version 1
[    1.367279] Loading compiled-in X.509 certificates
[    1.368120] Key type ._fscrypt registered
[    1.368154] Key type .fscrypt registered
[    1.368182] Key type fscrypt-provisioning registered
[    1.379808] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.380086] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.380186] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[    2.633880] printk: console [ttyAMA0] enabled
[    2.648784] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.657190] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.663220] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    2.699309] of_cfs_init
[    2.702033] of_cfs_init: OK
[    2.720252] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.727485] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.734660] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.738531] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[    2.743242] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.748019] Waiting for root device PARTUUID=9a39dcf7-03...
[    2.754496] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.784972] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.835609] mmc1: new high speed SDIO card at address 0001
[    2.870037] mmc0: new ultra high speed DDR50 SDXC card at address 5048
[    2.877581] mmcblk0: mmc0:5048 SD128 119 GiB
[    2.884581]  mmcblk0: p1 p2 p3
[    2.912571] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.920842] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
[    2.932709] devtmpfs: mounted
[    2.945995] Freeing unused kernel memory: 2048K
[    2.965271] Run /sbin/init as init process
[    2.967864] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.977619] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.984773] usb 1-1: Product: USB2.0 Hub
[    2.990812] hub 1-1:1.0: USB hub found
[    2.994943] hub 1-1:1.0: 4 ports detected
[    3.036807] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-464c, throttling...
[    8.075027] request_module: modprobe binfmt-464c cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[    8.094452] Starting init: /sbin/init exists but couldn't execute it (error -8)
[    8.112985] Run /etc/init as init process
[    8.124830] Run /bin/init as init process
[    8.129663] Run /bin/sh as init process
[    8.150434] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-464c, throttling...
[   13.194970] request_module: modprobe binfmt-464c cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   13.214447] Starting init: /bin/sh exists but couldn't execute it (error -8)
[   13.232712] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
[   13.246910] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.103-v7l+ #1530
[   13.253710] Hardware name: BCM2711
[   13.257119] Backtrace: 
[   13.259603] [<c0b87f90>] (dump_backtrace) from [<c0b88324>] (show_stack+0x20/0x24)
[   13.267193]  r7:ffffffff r6:00000000 r5:60000093 r4:c12e6fd8
[   13.272873] [<c0b88304>] (show_stack) from [<c0b8c704>] (dump_stack+0xcc/0xf8)
[   13.280118] [<c0b8c638>] (dump_stack) from [<c0b88808>] (panic+0x130/0x33c)
[   13.287095]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c0e1cd8c r5:00000000
[   13.294941]  r4:c13564b8 r3:00000001
[   13.298532] [<c0b886d8>] (panic) from [<c0b90fd4>] (kernel_init+0x12c/0x134)
[   13.305594]  r3:a2ffe33c r2:a2ffe33c r1:00000000 r0:c0e1cd8c
[   13.311263]  r7:00000000
[   13.313811] [<c0b90ea8>] (kernel_init) from [<c02000ec>] (ret_from_fork+0x14/0x28)
[   13.321395] Exception stack(0xc191bfb0 to 0xc191bff8)
[   13.326458] bfa0:                                     00000000 00000000 00000000 00000000
[   13.334654] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   13.342848] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   13.349474]  r5:c0b90ea8 r4:00000000
[   13.353070] CPU1: stopping
[   13.355796] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.10.103-v7l+ #1530
[   13.362597] Hardware name: BCM2711
[   13.366006] Backtrace: 
[   13.368480] [<c0b87f90>] (dump_backtrace) from [<c0b88324>] (show_stack+0x20/0x24)
[   13.376070]  r7:ffffffff r6:00000000 r5:60000193 r4:c12e6fd8
[   13.381749] [<c0b88304>] (show_stack) from [<c0b8c704>] (dump_stack+0xcc/0xf8)
[   13.388995] [<c0b8c638>] (dump_stack) from [<c020f158>] (do_handle_IPI+0x30c/0x340)
[   13.396671]  r10:c0e245ac r9:c1958000 r8:c1818800 r7:00000001 r6:2eeee000 r5:00000001
[   13.404516]  r4:c1356390 r3:a2ffe33c
[   13.408106] [<c020ee4c>] (do_handle_IPI) from [<c020f1b4>] (ipi_handler+0x28/0x30)
[   13.415694]  r9:c1958000 r8:c1818800 r7:00000001 r6:2eeee000 r5:00000014 r4:c1804d00
[   13.423459] [<c020f18c>] (ipi_handler) from [<c028e3c8>] (handle_percpu_devid_fasteoi_ipi+0x80/0x154)
[   13.432703] [<c028e348>] (handle_percpu_devid_fasteoi_ipi) from [<c02873e4>] (generic_handle_irq+0x44/0x54)
[   13.442462]  r7:00000001 r6:00000000 r5:00000000 r4:c1096d90
[   13.448138] [<c02873a0>] (generic_handle_irq) from [<c0287b44>] (__handle_domain_irq+0x6c/0xc4)
[   13.456860] [<c0287ad8>] (__handle_domain_irq) from [<c020135c>] (gic_handle_irq+0x90/0xa4)
[   13.465230]  r9:c1958000 r8:c1096d9c r7:c1959f30 r6:f081400c r5:f0814000 r4:c1205b74
[   13.472992] [<c02012cc>] (gic_handle_irq) from [<c0200abc>] (__irq_svc+0x5c/0x7c)
[   13.480489] Exception stack(0xc1959f30 to 0xc1959f78)
[   13.485552] 9f20:                                     00000000 00004738 eff86344 c021ae60
[   13.493747] 9f40: ffffe000 c120509c c12050e4 00000002 00000001 c133d9cf c0e245ac c1959f8c
[   13.501942] 9f60: c1959f90 c1959f80 c0208850 c0208854 60000013 ffffffff
[   13.508571]  r9:c1958000 r8:00000001 r7:c1959f64 r6:ffffffff r5:60000013 r4:c0208854
[   13.516342] [<c020880c>] (arch_cpu_idle) from [<c0b97e88>] (default_idle_call+0x4c/0x118)
[   13.524544] [<c0b97e3c>] (default_idle_call) from [<c025895c>] (do_idle+0x118/0x168)
[   13.532307] [<c0258844>] (do_idle) from [<c0258c80>] (cpu_startup_entry+0x28/0x30)
[   13.539895]  r10:00000000 r9:410fd083 r8:00007000 r7:c1959ff8 r6:30c0387d r5:00000001
[   13.547740]  r4:00000092 r3:60000093
[   13.551330] [<c0258c58>] (cpu_startup_entry) from [<c020f7e0>] (secondary_start_kernel+0x170/0x17c)
[   13.560398] [<c020f670>] (secondary_start_kernel) from [<002018b0>] (0x2018b0)
[   13.567635]  r5:00000000 r4:018f8b00
[   13.571219] CPU2: stopping
[   13.573943] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.10.103-v7l+ #1530
[   13.580743] Hardware name: BCM2711
[   13.584152] Backtrace: 
[   13.586624] [<c0b87f90>] (dump_backtrace) from [<c0b88324>] (show_stack+0x20/0x24)
[   13.594213]  r7:ffffffff r6:00000000 r5:60000193 r4:c12e6fd8
[   13.599892] [<c0b88304>] (show_stack) from [<c0b8c704>] (dump_stack+0xcc/0xf8)
[   13.607138] [<c0b8c638>] (dump_stack) from [<c020f158>] (do_handle_IPI+0x30c/0x340)
[   13.614813]  r10:c0e245ac r9:c195a000 r8:c1818800 r7:00000001 r6:2ef02000 r5:00000002
[   13.622659]  r4:c1356390 r3:a2ffe33c
[   13.626249] [<c020ee4c>] (do_handle_IPI) from [<c020f1b4>] (ipi_handler+0x28/0x30)
[   13.633837]  r9:c195a000 r8:c1818800 r7:00000001 r6:2ef02000 r5:00000014 r4:c1804d00
[   13.641602] [<c020f18c>] (ipi_handler) from [<c028e3c8>] (handle_percpu_devid_fasteoi_ipi+0x80/0x154)
[   13.650846] [<c028e348>] (handle_percpu_devid_fasteoi_ipi) from [<c02873e4>] (generic_handle_irq+0x44/0x54)
[   13.660604]  r7:00000001 r6:00000000 r5:00000000 r4:c1096d90
[   13.666282] [<c02873a0>] (generic_handle_irq) from [<c0287b44>] (__handle_domain_irq+0x6c/0xc4)
[   13.675003] [<c0287ad8>] (__handle_domain_irq) from [<c020135c>] (gic_handle_irq+0x90/0xa4)
[   13.683372]  r9:c195a000 r8:c1096d9c r7:c195bf30 r6:f081400c r5:f0814000 r4:c1205b74
[   13.691135] [<c02012cc>] (gic_handle_irq) from [<c0200abc>] (__irq_svc+0x5c/0x7c)
[   13.698633] Exception stack(0xc195bf30 to 0xc195bf78)
[   13.703696] bf20:                                     00000000 00003ff0 eff9a344 c021ae60
[   13.711892] bf40: ffffe000 c120509c c12050e4 00000004 00000001 c133d9cf c0e245ac c195bf8c
[   13.720087] bf60: c195bf90 c195bf80 c0208850 c0208854 60000013 ffffffff
[   13.726716]  r9:c195a000 r8:00000001 r7:c195bf64 r6:ffffffff r5:60000013 r4:c0208854
[   13.734484] [<c020880c>] (arch_cpu_idle) from [<c0b97e88>] (default_idle_call+0x4c/0x118)
[   13.742685] [<c0b97e3c>] (default_idle_call) from [<c025895c>] (do_idle+0x118/0x168)
[   13.750448] [<c0258844>] (do_idle) from [<c0258c80>] (cpu_startup_entry+0x28/0x30)
[   13.758036]  r10:00000000 r9:410fd083 r8:00007000 r7:c195bff8 r6:30c0387d r5:00000002
[   13.765880]  r4:00000092 r3:60000093
[   13.769471] [<c0258c58>] (cpu_startup_entry) from [<c020f7e0>] (secondary_start_kernel+0x170/0x17c)
[   13.778537] [<c020f670>] (secondary_start_kernel) from [<002018b0>] (0x2018b0)
[   13.785775]  r5:00000000 r4:018f8b00
[   13.789359] CPU0: stopping
[   13.792084] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.103-v7l+ #1530
[   13.798885] Hardware name: BCM2711
[   13.802294] Backtrace: 
[   13.804766] [<c0b87f90>] (dump_backtrace) from [<c0b88324>] (show_stack+0x20/0x24)
[   13.812354]  r7:ffffffff r6:00000000 r5:60000193 r4:c12e6fd8
[   13.818032] [<c0b88304>] (show_stack) from [<c0b8c704>] (dump_stack+0xcc/0xf8)
[   13.825277] [<c0b8c638>] (dump_stack) from [<c020f158>] (do_handle_IPI+0x30c/0x340)
[   13.832952]  r10:c0e245ac r9:c1200000 r8:c1818800 r7:00000001 r6:2eeda000 r5:00000000
[   13.840797]  r4:c1356390 r3:a2ffe33c
[   13.844386] [<c020ee4c>] (do_handle_IPI) from [<c020f1b4>] (ipi_handler+0x28/0x30)
[   13.851973]  r9:c1200000 r8:c1818800 r7:00000001 r6:2eeda000 r5:00000014 r4:c1804d00
[   13.859738] [<c020f18c>] (ipi_handler) from [<c028e3c8>] (handle_percpu_devid_fasteoi_ipi+0x80/0x154)
[   13.868981] [<c028e348>] (handle_percpu_devid_fasteoi_ipi) from [<c02873e4>] (generic_handle_irq+0x44/0x54)
[   13.878740]  r7:00000001 r6:00000000 r5:00000000 r4:c1096d90
[   13.884417] [<c02873a0>] (generic_handle_irq) from [<c0287b44>] (__handle_domain_irq+0x6c/0xc4)
[   13.893139] [<c0287ad8>] (__handle_domain_irq) from [<c020135c>] (gic_handle_irq+0x90/0xa4)
[   13.901508]  r9:c1200000 r8:c1096d9c r7:c1201ec8 r6:f081400c r5:f0814000 r4:c1205b74
[   13.909270] [<c02012cc>] (gic_handle_irq) from [<c0200abc>] (__irq_svc+0x5c/0x7c)
[   13.916767] Exception stack(0xc1201ec8 to 0xc1201f10)
[   13.921831] 1ec0:                   00000000 00003474 eff72344 c021ae60 ffffe000 c120509c
[   13.930027] 1ee0: c12050e4 00000001 00000001 c133d9cf c0e245ac c1201f24 c1201f28 c1201f18
[   13.938220] 1f00: c0208850 c0208854 60000013 ffffffff
[   13.943284]  r9:c1200000 r8:00000001 r7:c1201efc r6:ffffffff r5:60000013 r4:c0208854
[   13.951051] [<c020880c>] (arch_cpu_idle) from [<c0b97e88>] (default_idle_call+0x4c/0x118)
[   13.959251] [<c0b97e3c>] (default_idle_call) from [<c025895c>] (do_idle+0x118/0x168)
[   13.967014] [<c0258844>] (do_idle) from [<c0258c80>] (cpu_startup_entry+0x28/0x30)
[   13.974602]  r10:0000015e r9:c1054a60 r8:ffffffff r7:c1054a60 r6:c1205040 r5:c1205048
[   13.982447]  r4:000000d9 r3:c108c294
[   13.986036] [<c0258c58>] (cpu_startup_entry) from [<c0b90ea0>] (rest_init+0xbc/0xc4)
[   13.993802] [<c0b90de4>] (rest_init) from [<c1000ab4>] (arch_call_rest_init+0x18/0x1c)
[   14.001734]  r5:c1205048 r4:c1356068
[   14.005322] [<c1000a9c>] (arch_call_rest_init) from [<c1001098>] (start_kernel+0x568/0x59c)
[   14.013691] [<c1000b30>] (start_kernel) from [<00000000>] (0x0)
[   14.019643] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]-
--