############################################################################
#
# SoftHSMv2 dual versions
#
# Works with CentOS 7
#
# The opensc package needs to be installed.
#
############################################################################
#
# Install a software HSM module for doing the PKCS11 testing of libcoap.
# Real hardware can be used if you have the appropriate library module.
#
# It is assumed that the opensc package is installed.
#
# When installing SoftHSMv2 from your system's package manager, check that the
# OpenSSL version is at least 1.1.0.  If not, then you will need to dual
# install SoftHSMv2 as below; otherwise you can use the existing SoftHSMv2.
#
# SoftHSMv2 is built using OpenSSL, but GnuTLS can use the PKCS11 interface.
# Note that if the default OpenSSL version is less than 1.1.0, you will need
# to install a dual stack version of OpenSSL as per HOWTO.dual.openssl.
#
# Creates module /usr/local/lib/softhsm/libsofthsm2.so
#

# Add line below to /etc/security/limits.conf to support memory locking

*               -        memlock         unlimited

# Get the latest SoftHSM
git clone https://github.com/opendnssec/SoftHSMv2.git

# Build code
cd SoftHSMv2/
sh autogen.sh
PKG_CONFIG_PATH=/opt/openssl/lib/pkgconfig ./configure --enable-silent-rules \
  --with-crypto-backend=openssl --disable-gost LDFLAGS=-L/opt/openssl/lib \
  CPPFLAGS=-I/opt/openssl/include --with-openssl=/opt/openssl
make
# You may need to comment out constexpr lines (fixes for gcc10) in
#  src/lib/crypto/PublicKey.h src/lib/crypto/PrivateKey.h if you get
# compile errors.
sudo make install
cd ..

# Make sure p11-kit softhsm modules have the correct module: fully qualified
# path where the entry is of the form (in particular for GnuTLS) :-
# /usr/share/p11-kit/modules/softhsm*
#
#  module: /usr/local/lib/softhsm/libsofthsm2.so

# If /var/lib/softhsm/tokens is owned by user ods (because softhsm2 package is
# alread installed), make the logged in <user> a part of the group ods so
# that the tokens can be accessed.
sudo usermod -a -G ods <user>
# log out and then log back in again
# Confirm that you have ods in your group
id

############################################################################
#
# libp11 (needed for OpenSSL as it provides the PKCS11 engine)
#
############################################################################
#
# Install a pkcs11 library for OpenSSL to use as an engine.
# [GnuTLS has this built in]
#

# Get the latest libp11
git clone https://github.com/OpenSC/libp11.git

# Build code
cd libp11
./bootstrap
PKG_CONFIG_PATH=/opt/openssl/lib/pkgconfig ./configure \
  --with-pkcs11-module=/usr/local/lib/softhsm/libsofthsm2.so
make
sudo make install
cd ..

# Verify that pkcs11 is available

/opt/openssl/bin/openssl engine pkcs11 -t