dperf

English | 中文

dperf is a DPDK based 100Gbps network performance and load testing software.

Advantage

• High performance：
  • Based on DPDK, dperf can generate huge traffic with a single x86 server: tens of millions of HTTP CPS，hundreds of Gbps throughput and billions of concurrent connections.
• Detailed statistics：
  • Provides detailed statistics and identify every packet loss.
• Support multiple scenarios：
  • Load testing and stability testing for Layer 4 Load Balancer and other Layer 4 gateways
  • Network performance testing for servers on cloud
  • Performance test of network package processing capability for NIC and CPU
  • Can be used as a high performance HTTP server or client for load testing

Performance

HTTP Connections per Second

HTTP Throughput per Second

HTTP Current Connections

UDP TX PPS

Note: this test is under one 25Gbps Mellanox CX4

Client & Server Configuration

Above performance is obtained with below configurations:

• MEM: 512GB(hugepage 100GB)
• NIC: Mellanox MT27710 25Gbps * 2
• Kernel: 4.19.90

Statistics

dperf outputs various statistics every second：

• TPS, CPS, various PPS
• Errors of TCP/Socket/HTTP
• Packets loss/drop
• Retransmissions of TCP Flags

seconds 22                 cpuUsage 52
pktRx   3,001,058          pktTx    3,001,025          bitsRx   2,272,799,040      bitsTx  1,920,657,600      dropTx  0
arpRx   0                  arpTx    0                  icmpRx   0                  icmpTx  0                  otherRx 0          badRx 0
synRx   1,000,345          synTx    1,000,330          finRx    1,000,350          finTx   1,000,350          rstRx   0          rstTx 0
synRt   0                  finRt    0                  ackRt    0                  pushRt  0                  tcpDrop 0
skOpen  1,000,330          skClose  1,000,363          skCon    230                skErr   0
httpGet 1,000,345          http2XX  1,000,350          httpErr  0
ierrors 0                  oerrors  0                  imissed  0

Getting Started

Set hugepages

#edit '/boot/grub2/grub.cfg' like this, and reboot the OS
linux16 /vmlinuz-... nopku transparent_hugepage=never default_hugepagesz=1G hugepagesz=1G hugepages=8

Build DPDK

#edit 'config/common_base' to enable PMDs
#Mellanox CX4/CX5 requires 'CONFIG_RTE_LIBRTE_MLX5_PMD=y'
#HNS3 requires 'CONFIG_RTE_LIBRTE_HNS3_PMD=y'
#VMXNET3 requires 'CONFIG_RTE_LIBRTE_VMXNET3_PMD=y'

TARGET=x86_64-native-linuxapp-gcc #or arm64-armv8a-linuxapp-gcc

cd /root/dpdk/dpdk-stable-19.11.10
make install T=$TARGET -j16

Build dperf

cd dperf
make -j8 RTE_SDK=/root/dpdk/dpdk-stable-19.11.10 RTE_TARGET=$TARGET

Bind interface

#Mellanox NIC skip this step!
#Suppose your PCI number is 0000:1b:00.0

modprobe uio
modprobe uio_pci_generic
/root/dpdk/dpdk-stable-19.11.10/usertools/dpdk-devbind.py -b uio_pci_generic 0000:1b:00.0

Start dperf server

#dperf server bind at 6.6.241.27:80,  gateway is 6.6.241.1
./build/dperf -c test/http/server-cps.conf

Send request from a client

#the client IP must be in the range of 'client' in the configuration file
ping 6.6.241.27
curl http://6.6.241.27/

Running the tests

Below example will start a HTTP CPS stress test. #run dperf server ./build/dperf -c test/http/server-cps.conf

#from another host, run dperf client
./build/dperf -c test/http/client-cps.conf

Documentation

See the website at https://dperf.org/.

Limitation

• dperf requires that the HTTP message is in one packet, which is not suitable for the test of layer 7 load balancer;
• dperf requires exclusive use of the network interfaces.
• dperf does not have routing capability. It is recommended to build a test environment with a switch.

Contributing

dperf welcomes your contribution. See the CONTRIBUTING file for details.

Authors

• Jianzhang Peng

License

dperf is distributed under the Apache License, Version 2.0.